TUBULAR PRODUCTS are made of polypropylene and are used for drainage applications from the fixture to the drain pipe.

 

  • Polypropylene is heat and chemical resistant and outperforms metal and plastic alternatives.
  • Install tubular products using slip joints; do not solvent weld.
  • Use silicone sealant and plumber's putty on all slip jamnut washer connections.
  • All tubular parts come merchandised in colored bags with installation instructions and bar code.
  • Refer to the 700 and 800 series product lines for Sch. 40 PVC and ABS traps and trap adapters.

 

Polypropylene Tubular Products

Products

Next Page

Attaches directly to sink strainer to extend drain tubes

Flanged Tailpiece

Attaches directly to sink strainers to extend drain tubes.

Part # Size Box Qty Box Wt
186041 1 1/2" x 1 1/4" 5 1
138061 1 1/2" x 6" 5 1
138121 1 1/2" x 12" 5 2
Used to extend drain tubes; attaches directly to tubular tailpiece

Adjustable Tailpiece

Used to extend drain tubes, attaches directly to tubular tailpiece.

Part # Size Box Qty Box Wt
137501 1 1/4" x 6" 5 1
138507 1 1/2" x 6" 5 1
138301 1 1/2" x 12" 5 2
Used for hooking up automatic dishwasher drains to exposed sink drains in installation not employing garbage disposal. Branch accepts 7/8" I.D.

Dishwasher Tailpiece (Inlet)

Used for hooking up automatic dishwasher drains to exposed sink drains in installation not employing garbage disposal. Branch accepts 7/8" I.D. hose or rubber dishwasher drain connectors.

Part # Size Box Qty Box Wt
138401 1 1/2" x 8" x 7/8" 5 2
Connects a dishwasher hose to drain inlet or disposal unit.

Dishwasher/Disposal Connector w/Clamps

Connects a dishwasher hose to drain inlet or disposal unit.

Part # Size Box Qty Box Wt
138451 1 / 7/8" x 7/8" / 5/8" 5 2
Fits any drain system. Designed to connect double compartment sinks that have a garbage disposal into a single trap. This unique unit can be ass

Disposer Kit

Fits any drain system. Designed to connect double compartment sinks that have a garbage disposal into a single trap. This unique unit can be assembled directly to sink strainer and disposal. Features a baffle in the tee to prevent back ups.

Part # Size Box Qty Box Wt
138471 1 1/2" x 15" 10 4

Baffle Tee

Used to connect garbage disposal discharge into kitchen sink drain, using the existing trap. Baffle prevents disposal discharge from backing up into the other sink.

Part # Size Box Qty Box Wt
186301 1 1/2" 5 2
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

Slip Coupler

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

Part # Size Box Qty Box Wt
138601 1 1/2" / 1 1/4" 5 1
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

90° Slip Coupler

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Allows for changes in direction and realignment of exposed tubular piping.

Part # Size Box Qty Box Wt
138701 1 1/2" / 1 1/4" 5 1
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

Tee Slip Coupler

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Connects multiple sinks or vanities into a single drain.

Part # Size Box Qty Box Wt
138801 1 1/2" / 1 1/4" 5 2
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

45° Slip Coupler

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Coupler allows for changes in direction and realignment of exposed tubular piping.

Part # Size Box Qty Box Wt
138901 1 1/2" / 1 1/4" 5 2
Replaces conventional washbasin J-Bends.

Washbasin J-Bend

Replaces conventional washbasin J-Bends.

Part # Size Box Qty Box Wt
171121 1 1/4" 5 1
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

J-Bend

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Replaces conventional sink traps.

Part # Size Box Qty Box Wt
171161 1 1/2" x 1 1/4" 5 2
Connects washbasin to DWV piping system.

Washbasin P-Trap

Connects washbasin to DWV piping system.

Part # Size Box Qty Box Wt
175141 1 1/4" 10 3
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

Sink P-Trap

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Connects sink to DWV piping system.

Part # Size Box Qty Box Wt
175151 1 1/2" / 1 1/4" 5 2
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

Sink P-Trap w/ Transition Adapter

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Connects sink to DWV piping system.

Part # Size Box Qty Box Wt
175161 1 1/2" / 1 1/4" 25 10
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.

P-Trap w/ Solvent Weld Elbow

Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes. Furnished with special PVC elbow to allow solvent welding directly to 1½" Sch. 40 pipe.

Part # Size Box Qty Box Wt
176151 1 1/2" x 1 1/2" / 1 1/4" 5 2
Combines the NovaVent™ anti-siphon valve and P-trap into a compact single unit.

Anti-Siphon P-Trap (built in vent)

Combines the NovaVent™ anti-siphon valve and P-trap into a compact single unit. The anti-siphon trap provides a simple way of solving waste pipe drainage problems caused by inadequate plumbing system venting. Replaces almost any current fixture trap.

Part # Size Box Qty Box Wt
178151 1 1/2" 10 6
Used in kitchen sink and washbasin applications where plumbing connection is made at floor. Adaptable 1½” x 1¼” washer included in P/N 177151.

S-Trap

Used in kitchen sink and washbasin applications where plumbing connection is made at floor. Adaptable 1½” x 1¼” washer included in P/N 177151. Can be utilized to connect 1½” tubes, 1¼” tubes, as well as adapt from 1½” to 1¼” tubes.

Part # Size Box Qty Box Wt
177141 1 1/4" 5 3
177151 1 1/2" x 1 1/4" 5 4
Connects double compartment sinks into a single trap located to one side under the sink.

End Opening Continuous Waste (adjustable-direct connect)

Connects double compartment sinks into a single trap located to one side under the sink. Can be assembled directly to sink strainers or tailpiece pipes. Features a removable baffle.

Part # Size Box Qty Box Wt
186001 1 1/2" 5 3
Connects double compartment sinks into a single trap located in the center under the sink.

Center Opening Continuous Waste (adjustable-direct connect)

Connects double compartment sinks into a single trap located in the center under the sink. Connects directly to sink strainers or tailpiece pipes.

Part # Size Box Qty Box Wt
186101 1 1/2" 5 3

Next Page

Submitting Form...

The server encountered an error.

Form received.

P    800–521–7488

F     8107441653

 

 

Genova Products, Inc. World Headquarters

7034 E Court St

Box 309

Davison, MI 48423-0309

Copyright 2016 Genova Products, Inc. All Rights reserved.

customer service icon
Attaches directly to sink strainer to extend drain tubes
Used to extend drain tubes; attaches directly to tubular tailpiece
Used for hooking up automatic dishwasher drains to exposed sink drains in installation not employing garbage disposal. Branch accepts 7/8" I.D.
Connects a dishwasher hose to drain inlet or disposal unit.
Fits any drain system. Designed to connect double compartment sinks that have a garbage disposal into a single trap. This unique unit can be ass
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Replaces conventional washbasin J-Bends.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Connects washbasin to DWV piping system.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Combines the NovaVent™ anti-siphon valve and P-trap into a compact single unit.
Used in kitchen sink and washbasin applications where plumbing connection is made at floor. Adaptable 1½” x 1¼” washer included in P/N 177151.
Connects double compartment sinks into a single trap located to one side under the sink.
Connects double compartment sinks into a single trap located in the center under the sink.

P     800–521–7488

F     8107441653

 

 

Genova Products, Inc.

7034 E Court St

Box 309

Davison, MI 48423-0309

customer service icon
Attaches directly to sink strainer to extend drain tubes
Used to extend drain tubes; attaches directly to tubular tailpiece
Used for hooking up automatic dishwasher drains to exposed sink drains in installation not employing garbage disposal. Branch accepts 7/8" I.D.
Connects a dishwasher hose to drain inlet or disposal unit.
Fits any drain system. Designed to connect double compartment sinks that have a garbage disposal into a single trap. This unique unit can be ass
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Replaces conventional washbasin J-Bends.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Connects washbasin to DWV piping system.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Adaptable 1½" x 1¼" washer included. Can be utilized to connect 1½" tubes, 1¼" tubes, as well as adapt from 1½" to 1¼" tubes.
Combines the NovaVent™ anti-siphon valve and P-trap into a compact single unit.
Used in kitchen sink and washbasin applications where plumbing connection is made at floor. Adaptable 1½” x 1¼” washer included in P/N 177151.
Connects double compartment sinks into a single trap located to one side under the sink.
Connects double compartment sinks into a single trap located in the center under the sink.

inquiry@genovaproducts.com

P    800–521–7488

F    8107441653

Genova Products, Inc.

7034 E Court St

Box 309

Davison, MI 48423-0309

 

customer service icon